Support Station Instructions for the Fixed Position
| February 2019The Support Station offers an opportunity for providing hygiene care in an upright position. Important: User's weight must not exceed 250 lbs.
WARNING: To prevent falls or injury, do not adjust the height or angle of the trunk board with a client on it. Adult supervision is required at all times. The support strap is not a substitute for close caregiver supervision.
Click here for instructions for the Pivot Position.
Support Station in the Fixed Position
 |
1. Adjust Trunk Board HeightAdjust the height of trunk board height so that the front edge of the board is at mid-sternum level for a seated user. |
 |
2. Adjust Trunk Board AngleAdjust the trunk board angle using the upper handles. When the board is closer to horizontal, it will bear most of the user's weight. |
 |
3. Wheel the user to Support Station
|
 |
4. Transition to StandingTransition the user to a supported standing position and fasten the support strap. The user can assist in the transfer by pulling on the handholds or slots in the trunk board. |
 |
5. Provide hygiene careProvide hygiene care in the upright position, and transition the user back to the wheelchair. |
Review these further available resources
For further instructions and warnings please refer to the product manual.
